Grafotronic PHARMA2

for Pharma and Security labelS

The PHARMAis a bi-directional 200% Inspection machine. A servo driven linear buffer reverse the web for fault placement and re-inspection. The buffer movement is ultrafast, precise and guarantees no missed faults detected by the inspection system. Web tension and slitting is unaffected by the reverse movement in re-inspection mode. The Pharma2 is the perfect choice for pharma and security label inspection.

Grafotronic PHARMA2



Drive system:

  • Latest servo technology for full web control during high speed of 1148ft ft/min [350 m/min]
  • Machine in solid construction and perfectly balanced

Intelligent unwind unit:

  • Latest electronic web guide with ultrasonic sensor
  • Built-in measuring system of mother roll and automatic set up of web tension throughout the machine
  • Lift for heavy rolls available

Bi-directional inspection table:

  • Table with additional splice station, for installation of 100% Inspection system
  • High-speed integrated trolley servo buffer underneath table
  • Stable movement back / forward with +/- 0.008″ [0.2 mm] tolerancee

Ink-jet module:

  • Module for ink-jet numbering
  • Inspection of numbers available


  • Operator friendly area for visual inspection with a clear view and easy fault replacement
  • Driven waste shaft for meters of waste
  • Most 100% inspections systems available
  • Minimum reaction times for high-speed inspection

Slitting modules:

  • Shear cut slitting system
  • The revolutionary SCI-FI KNIVES automatic knife positioning system
  • Set up time: 1.5 sec / knife. Min slitting width: 0.6″ [15 mm]
  • Razor blade slitting station
  • Crush cut station
  • Auto set or manual under/back scorer

Rewind unit:

  • Semi-turret: turret for rolls up to 16.5″ [420 mm] in turret mode or 23.5″ [600 mm] on 1 shaft
  • AUTOCUT automatic web cutting and start of new cycle
  • Single & Dual rewind: for label and mono film materials with perfect and automatic tension control for rolls up to 23.5″ [600 mm]

Rewind shafts:

  • With the new Q-SHAFT you turn 1 handle 180o to change the shaft
  • Q-SHAFT is quick, easy and hassle free

Technical specification

  • Web widths: 14″ / 18″ [350 mm / 450 mm]
  • Max. mechanical speed: 984 ft/min [300 m/min]
  • Max. re-inspection speed: 344.5 ft/min [105 m/min]
  • Drive: Servo
  • Unwind diameter: 31.5″ / 39.5″ [800 mm / 1000 mm]
  • Max. rewind diameter: 23.5″ / 2×23.5″ [600 mm / 2×600 mm]
  • Min. slitting width: 0.5″ [12 mm]
  • Min. slitting width with SCI-FI: 0.6″ [15 mm]
  • Operation: R/L or L/R
  • Size: L 130″ x W 51″ x H 71″ [L 3300 x W 1300 x H 1800 mm]

Photos & videos